Page 11 - EMCORE-Broadband-Fiber-Optics-Brochure
P. 11
Satellite & Microwave Fiber Optic Transport
BASEBAND, IF, L, S, C, X, DBS, Ku, K, Ka, and Ultra-Wideband Transport
50 MHz-40 GHz ULTRA-WIDEBAND Fiber Optic Transport Microwave Transport
Highlights
OTS-2 Series Microwave Band Fiber Optic Links n Low RIN source laser
n High-dynamic-range of >110 dB-Hz2/3
The OTS-2 Series Unamplified or Amplified (Tx, Rx Fixed Gain) n Microprocessor-based control for laser
Microwave Band Fiber Optic Links are a family of SNMP man-
aged fiber optic transmitters and receivers that provide high- bias, modulator bias and link gain
performance 50 MHz – 40 GHz transport within the Optiva n DWDM cooled DFB laser, 10 dBm output
modular platform. 18, 22 and 40 GHz options are available. n SNMP & RS-232 monitoring and control
Optiva microwave units are tailored to the requirements of Microwave Band Applications
higher frequency applications such as microwave antenna signal n Microwave antenna signal distribution
distribution, electronic warfare systems, broadband delay lines, n Electronic Warfare (EW) systems
signal processing, and phased array antennas. Utilizing EM- n Broadband delay line and signal pro-
CORE’s high-performance, ultra-low Relative Intensity Noise (RIN) source laser and high optical in-
put power capable photodiodes, these modules provide high-dynamic-range. The system operates cessing systems
at a nominal wavelength of 1550 nm. Wavelength selected lasers on the ITU grid are also available n Frequency distribution & radar systems
to support multichannel DWDM applications.
RF & Fiber Optic Switching and Signal Distribution Splitter & Switching Unit
Highlights
Optiva OTS-RFS Series Wideband RF Splitters
n Switching, splitting options to 22 GHz
Optiva OTS-RFS Wideband RF Splitters (RFS) are designed to provide RF signal distribu- n 50 & 75 Ohm BNC or 50 Ohm SMA
tion for satellite antenna applications from 5 MHz to 22 GHz. Band-specific 2.3, 3, 18 n 1x1 and 1x4 redundant switch
and 22 GHz optimized versions are available. The OTS-RFS series provides RF signal
distribution to support 1x1 RF fiber link redundancy applications. configurations (OTS-RSU)
n Automatic and manual redundancy
Optiva OTS-RSU Series Wideband RF Redundancy Switch Units
modes (OTS-RSU)
Optiva OTS-RSU Wideband RF Redundancy Switch Units (RSU) n Dedicated Comm-link for rapid switch
support satellite signal transport link redundancy applications
for 1x1 and 1x4 redundant switch configurations when inte- response (OTS-RSU-1 models)
grated with Optiva RF fiber optic transmitters and receivers. n Single or double 2x2 optical switch
Band-specific 2.3, 3, 18 and 22 GHz optimized versions are
available. units (OTS-OSU)
n SNMP monitoring & control
Optiva OTS-1-OSU / OTS-2-OSU 2x2 Dual-Band Optical Switch Units
(OTS-RSU, OTS-OSU)
The Optiva OTS-1-OSU (single switch) and OTS-2-OSU (double switch) units are opti-
mized to perform in the 1310 nm/1550 nm (dual-band) operating wavelengths. The Switch & Splitter Applications
OSU integrated with EMCORE’s family of fiber delay line units provides a wide range n RF redundant link (OTS-RFS, OTS-RSU)
of configurable microwave system delay line links for satellite, radar and calibration n Configurable delay system (OTS-1-OSU)
applications, plus general optical switching for fiber line applications. n Optical link switch (OTS-1-OSU)
> www.emcore.com | 11